100% Plug and Play turn signal kit for Polaris Ranger
Install video: https://www.youtube.com/watch?v=DcHEFq5ipC8
Light Options: https://www.youtube.com/watch?v=5lW5yfnvpUs&t=35s
Prior to ordering, verify what model you have. The older 570's will have a 3-pin connector on the left side of the frame rail above the rear tire. The newer 570's will have an 8-pin connector on the top center of the frame, just rearward of the engine.
For the rear, our kit integrates with factory taillights. Our rear harness plugs into the factory harness to take over control of the brake light circuit with our turn signal controller.
For the front, choose from:
- 1-1/4" round LED with 6 LEDs built into each one for maximum brightness
- 2x 3/4" round LEDs with 3 LEDs built into each one for maximum brightness
- 3x 3/4" round LEDs with 3 LEDs built into each one for maximum brightness (additional $12)
- 3/4" x 4" smoked LED strip with 6 LEDs built into each one for maximum brightness
For the front sides, choose from:
- 1-1/4" round LED with 6 LEDs built into each one for maximum brightness
- 3/4" round LED with 3 LEDs built into each one for maximum brightness
- 3/4" x 4" smoked LED strip with 6 LEDs built into each one for maximum brightness
For control, select either 3 rocker switches (horn, hazard, and turn signal) or column mounted lever with our custom laser cut and powdercoated brackets.
Our kits use all OEM connectors to plug into the machine and are made in the USA. Our turn signal control module is assembled and overmolded in house.