Complete turn signal kit for the CF Moto U10 Pro, XL, Highland etc. Includes hazards and horn.
 
Unfortunately CF Moto disabled the ability for dealers to activate the turn signals in the BCM (body control module) so for these, wires must be run to all 4 corners to flash the built in amber lights.
 
Our lever mounts directly to the steering column. If you have wipers, we have a switch that mounts in the dash to control them via the factory wiring. Simply remove the wiper switch on your steering column and plug our switch in it's place.
 
Our front harness plugs directly into the headlights to activate the amber. We also have provisions for a side marker light to put on the fenders for more visibility. There is a grommet in the firewall that this harness gets passed through after removing the tape.
 
The rear harness plugs into our front harness, then runs back to the taillights to flash the ambers back there. Unfortunately to run the rear harness, the skid plate needs to be removed, our harness follows the factory harness to each taillight.
 
Our controller plugs inline with the connector going to the USB charge port and gets tied up under the dash. It has a built-in self-cancel feature after 45 seconds if you leave the lever on.
 
As for the arrows in the dash, those are controlled via the CAN network so we aren't able to flash them.