Want to use the 3 silver Aux switches in the middle of your dash? We have come out with a PNP fuse box setup that installs in less than a half hour and gives you SIX 30-amp fused relay outputs that get toggled on/off with the 3 switches. Simply hook up your accessories to wire leads that come in the kit, insert them into the connectors, and plug them in! Now you can turn on/off light bars, whip lights, chase lights, rock lights, sound bar, or anything else you want to install in your Z10 by flicking the switch up/down!
Installation is easy. Mount fuse box bracket to threaded boss under the hood. Remove factory auxiliary bus bar, mount connector bracket under factory bus bar, plug factory bus bar into the accessory connector. Snap 6 connectors into their locations on plate, attach ground ring to open chassis ground with provided bolt, attach accessory power ring to bus bar, attach red cable to winch terminal Plug in our controller to the fuse box and the 3 aux connectors next to the winch contactor and you're done!
Also comes with wire leads for the other Aux switches that are located by the headlight. One plug is down by the winch on the passenger side up front, the other one is by the driver's left leg. Simply splice the wire leads to your accessory (most likely a roof mounted light bar and a bumper mounted light bar), insert the wires into the connectors that are already on your machine, and plug it in!
This kit includes:
Fuse box with brackets to mount everything under the hoodBolts to mount fuse box, factory aux bus bar, and ground ring
Blocked off connectors to seal unused relay outputs
18 gauge and 14 gauge wire leads to insert into blocked off connectors to easily install accessories
14 and 18 gauge wire leads for the factory Aux 1 and 2 outputs with buttons next to headlight knob
Proprietary controller to turn on/off relays using the factory aux switches and their outputs under the hood.
Shipping will start by August 15. Prior to initial shipment, we are taking preorders for 10% off!
